Application of Manus-Bond 67-A on diverse materials such as cement and wood, will showcase joint and crack filling, non-discoloration, and mildew resistance.

Acrylic Latex

Manus-Bond 50A-HV sealant's application on various construction materials highlights sound and vapor transmission reduction, and adherence to ASTM, AAMA, and Federal specifications.

Butyl

Co-Polymers

Co-Polymer

Flex-Weld 5 epoxy can be applied on materials like ceramics and metal, demonstrating excellent adhesion, UV resistance, and flexibility without a primer.

Epoxy-Hybrid

Foam Sealant

Foam Sealant

Neoprene

Neoprene

Polyurethane

Polyurethane

Application of Manus-Bond 73GP on building materials like glass and steel highlights non-sag, weather, and temperature resistance, and mildew resistance.

Silicone

Manus-Bond 75-AM Industrial Grade in use on surfaces like marble and glass showcases fast curing, weather resistance, and multi-surface adhesion.

STP Polyether

Manus-Bond 75-AM Industrial Grade adhesive applied on various materials including steel and vinyl, highlights its adhesion, weather resistance, and paint compatibility.

Manus-Bond 75-AM Perm Flash

Manus Bond Perm-Flash Liquid Membrane by Manus Products, Inc is the latest advancement in liquid applied building envelope membranes. A hybrid  elastomeric adhesive/sealant that forms a permanently flexible barrier preventing undesirable water and air through building envelopes. Perm-Flash is breathable—allowing damp surfaces to dry.

A virtual living skin for buildings that bonds to a wide variety of building envelope substrates including, gypsum board, OSB, plywood, concrete, CMU, cement board, steel, aluminum, Kynar ®, Galvalume®, painted  surfaces and many vinyls and plastics. Perm-Flash liquid membrane is used to seal rough openings, flash windows and doors and as a complete building membrane. Perm-Flash’s unique moisture cure formulation cures fast and can be applied over a wide temperature range. It cures in the presence of water and remains flexible, is non-sag and has exceptional resistance to weathering, UV light and temperature extremes. Perm-Flash will not tear and remain durable when exposed to weather
during construction.

Perm-Flash is an environmentally compliant coating that is classified as very low VOC, does not contain water, solvents or isocyanates and is mildew resistant when fully cured. USDA accepted. 

Technical Details

Specific Gravity 1.5-1.7
Color Teal Green
Skin Time 30 Min @ 75F/50% RH
Hardness (Shore A) 40-45
Tensile Strength 180 Psi
Elongation 400%
Peel Strength 25 Pli
Sag Nil
Service Temperature -75F To 300F
Voc Content 30 Grams/Liter Max

Documentation

File Asset

TDS- Perm-Flash

Compatible Materials

AluminumConcreteCementGalvalume®GypsumKYNAR500®OSBPainted SurfacesPlasticsPlywoodSteelVinylCMU

Additional Details

Packaging Bulk packaged in 1, 5 and 55 gallon containers. Convenience packaged per order in 10.1 and 28fl.oz. cartridges or 20 fl.oz. sausage packs.
Application Perm-Flash will produce an opaque membrane when applied at the recommended 12-15 wet mils to simplify quality control and inspection. At 12-15 mils the estimated coverage is 1 square foot per 0.85 fl.oz. Bonds to damp substrates and cures in wet weather. Before use read Surface Preparation and review MSDS.
Surface Preparation Apply to clean surfaces free of contaminants that can adversely affect adhesion. Remove all old sealant before applying product. Some substrate materials may not be compatible with this  product. Testing substrate compatibility with this product before full application is recommended. Ensure positive drainage at all rough openings. 
Painting Cured product may be painted with most industrial & consumer paints. Testing prior to painting is recommended.  
Storage Life For maximum shelf life, store unopened product at or below 80ºF.
12 months = cartridges and sausage packs
6 months = 1, 5 and 55 gallon containers.
Precautions Some applications may not be compatible with this product. Some cleaners, solvents may not be compatible with this product. Testing suitability for intended application before proceeding with full application is recommended. Use with adequate ventilation. Inhalation of vapor during application and
cure may cause slight eye or throat irritation. In case of contact with eyes, lips, or mouth, flush thoroughly with water. If irritation persists, consult a physician. Avoid repeated, prolonged contact with skin. See MSDS for additional information. KEEP OUT OF REACH FROM CHILDREN. 
Technical Service Manus technical representatives are always available to provide assistance. Please contact our Technical Service Department with your questions or requests for specific applications.
Limited Warranty Any goods proved defective will be replaced or the purchase price refunded.  The limited warranty described herin is in lieu of any other warranty, expressed or implied, including any implied warranty of merchantability or fitness for a particular use. The user shall determine suitability of the product for its intended use. Liability for any incidental or consequential damage or loss is excluded. The user assumes all risks of the product's use, handling or storage.

Explore More

Three containers of Manus-Bond 75-AM High Green Strength on a white background, showcasing the adhesive's key features for transportation applications.

75-AM NSF61

Manus Bond: 77-HR Polyurethane

77-HR

STP Polyether: Manus Bond 75AM

76-AM-VaPerm